Project Case Library

• Source:Project Case Library / Date:2026-10-31

  RGB-D Depth and Colour Measure a Pallet in One 6 s Shot

  Pallet volume feeds billing and slotting. An RGB-D camera takes depth and colour in one static exposure, measures volume in about 6 seconds and flags presence.

  Details
• Source:Project Case Library / Date:2026-10-31

  Rail Weldments: AR Twin Turns Deviation Into a Heat Map

  Rail bogie frames reach over 10 metres. Automatic registration aligns a CAD twin and renders rotation, offset and missing parts as a colour heat map.

  Details
• Source:Project Case Library / Date:2026-10-31

  Frame Assembly Check: 110 to 38 Minutes With AR and AI

  Frame assemblies mix structural checks with label, model, quantity and SOP checks. Tablet AR plus AI cut drawing inspection from 110 minutes to 38.

  Details
• Source:Project Case Library / Date:2026-10-31

  Multi-Variant Large Parts: Scan, Overlay CAD, 360 s per Part

  Large parts arrive from several suppliers, so incoming checks must handle many variants. Scan-code workflows and tablet AR compare CAD in about 360 seconds.

  Details
• Source:Project Case Library / Date:2026-10-31

  Nearly 100 Cameras Fit a 1,000-Point Check Inside 75 s

  Over 1,000 inspection points used to take minutes. Nearly 100 synchronized cameras, one global calibration and parallel judgment hold a 73 second cycle.

  Details
• Source:Project Case Library / Date:2026-10-31

  Inline 2D/3D Cell Checks a B-Pillar Around Laser Cutting

  Hot-formed B-pillars up to 1500 x 2800 mm need pre-cut localization and post-cut hole, slug and edge checks. Two robots with 2D/3D imaging hold 42 seconds.

  Details
• Source:Project Case Library / Date:2026-10-31

  Cold Plate: Line Scan Plus Robot Re-Shoots at Rivets

  A cold plate needs full-face scratch detection plus front-on rivet checks on folded edges. A line scan and a robot area camera fuse at 45 seconds per plate.

  Details
• Source:Project Case Library / Date:2026-10-31

  Code-Switched Templates Drive Mixed-Model Die-Cast EOL

  Mixed-model die-cast lines change variant between units. Code reading selects template and light recipe, while AI and template matching arbitrate at 75 seconds.

  Details
• Source:Project Case Library / Date:2026-10-31

  Engine EOL in 65 s: Pose, OCR and Missing-Part Checks

  An engine passes a gantry station that must catch missing parts and match stamp, nameplate and barcode in 65 seconds, with a locating camera and a moving one.

  Details
• Source:Project Case Library / Date:2026-10-31

  Area Scan or Line Scan for Wide-Field Large Parts?

  Large parts defeat one camera, and stitching costs calibration. How 12 MP area scan and 2000 pixels per line line-scan divide the work at 8 seconds.

  Details