Project Case Library
-
Source:Project Case Library / Date:2026-10-31
Stereo and Laser Measure a Car Body in 90 Seconds
Body dimensions, form evaluation and surface defects in one pass: an optically tracked robot switches stereo and laser by feature, all three in 90 s.
Details -
Source:Project Case Library / Date:2026-10-31
Walking a 3D Scanner Along a 1 m Cylindrical Part
Pipes over 200 mm and 1 m long are awkward to inspect. A robot walks a 3D profile camera along the part, measuring defects, weld height and flatness in 600 s.
Details -
Source:Project Case Library / Date:2026-10-31
Getting 100 Cameras Aligned Before the Line Stops
Over 1,000 points need nearly 100 cameras to hit 75 s. Simulation verifies mounting and exposure before delivery, cutting commissioning nearly 50 percent.
Details -
Source:Project Case Library / Date:2026-10-31
One 2D Camera for a Large Battery Guard, Judged in 15 s
A battery guard is large but has few, regular features. One 2D camera, mounting holes as anchors and per-model benchmarks give a verdict in about 15 seconds.
Details -
Source:Project Case Library / Date:2026-10-31
Screening Fixtures for 1 to 2 mm Deviation With a Tablet
Fixtures and welded frames are too awkward to send for inspection. Tablet AR flags 1 to 2 mm deviations on the floor and sends doubtful parts to metrology.
Details -
Source:Project Case Library / Date:2026-10-31
Comparing 14 m Crane Assemblies Without a Metrology Room
Crane assemblies reach 14 m and are hazardous to crane across a plant. AR on a mobile terminal compares them to CAD on site in segments, about 900 s per part.
Details -
Source:Project Case Library / Date:2026-10-31
Checking a Welded Structure Without Any Markers at All
Welded structures are costly to crane into metrology. Tablet AR registers on the part geometry, overlays CAD and checks reversed, fitted and missing parts.
Details -
Source:Project Case Library / Date:2026-10-31
Porosity, Threads and a Barcode From One Robot Camera
A machined block needs porosity checks, tapped-hole checks and a readable code. One robot with an 8.5 mm lens presets imaging per point and finishes in 50 s.
Details -
Source:Project Case Library / Date:2026-10-31
Why 300 Tray Points Multiply Per-Point False Calls
A battery tray has 300 inspection points. One 25 MP global-shutter capture, class-specific CNN models and point routing complete the check in 196 s.
Details -
Source:Project Case Library / Date:2026-10-31
Segmented 3D Scan Locates 176 Blade Root Bolts
A 100 m blade root takes 176 studs on a 3.2 to 5.6 m pitch circle. Segmented 3D scanning with global fusion locates every hole pose in 41 seconds.
Details